Reads RocksDB or SQLite Copies
Point the software at the copied store and it lists the accounts inside. No server process is started.
Univik Stalwart Mail Recovery for Windows
Univik Stalwart Mail Recovery backs up Stalwart mailboxes on Windows without a server. It opens a copy of your RocksDB or SQLite store and turns each account into PST, EML or MBOX files. The original store stays unchanged because only the copy is read.
Free TrialRead-Only CopyNo Stalwart ServerWindows 10 and 11
*The free trial installs from the same setup file as Univik Stalwart Mail Recovery and saves 25 messages per folder in each account. A one-time licence starts at $999. Univik's 30-day refund policy covers each purchase.
Before You Download
When you must keep Stalwart mail for the long term, these five figures cover the supported stores, the version barrier, the trial limit and the price.
2
Stores Read
The software reads RocksDB and SQLite store copies.
1.0
Version Barrier
The vendor announcement says that version 1.0 cannot read a store created by an earlier release.
3
Formats
Choose from PST, EML or MBOX.
25
Trial Cap
No more than 25 messages are saved from each folder in trial mode.
$999
Licence Price
The licence costs $999 or more as one payment.
Key Features
When a store copy sits on your Windows PC, the software produces archives that do not depend on any Stalwart release.
Point the software at the copied store and it lists the accounts inside. No server process is started.
Twelve accounts give twelve sets of files, so a single user can be restored without a full import.
Limit the backup to the folders or the date range that you need before anything is saved.
Read a message in the preview pane to confirm that the account is correct before you start.
PST opens in Outlook, EML in desktop mail programs and MBOX in Thunderbird. You select the format for each backup.
Resume restarts a stopped backup and the log names the accounts that are complete.
The Problem First
If you keep only a copy of the Stalwart store, two facts decide whether you can read it later.
Problem 1: A Newer Stalwart Rejects Older Stores
The Stalwart 1.0 announcement states that the new version rejects stores made by earlier releases. A store copy that you keep for years may therefore be unreadable by a current server.
Problem 2: The Files Are Not Mail Files
Stalwart lists RocksDB, SQLite and other storage backends. Their files are database files, so browsing the folder shows no readable messages.
The Way Out: Archives That Outlast Any Release
Univik Stalwart Mail Recovery reads your store copy on Windows and saves each account as PST, EML or MBOX. Those formats do not depend on a Stalwart version.
If the store is damaged, begin with the recovery role of the same software and then back up what it returns.
Backup Files
Stalwart email backup files must open years from now, so the software offers three standard formats.
| Format | You receive | Reopen with |
|---|---|---|
| PST | One archive file for every account | Microsoft Outlook import |
| EML | Individual .eml messages in folders | Any desktop mail program |
| MBOX | One .mbox file per mailbox folder | Thunderbird or a similar reader |
Output goes to local or network folders. Office 365 and Gmail receive nothing.
When a user must see the mail in Outlook, select PST. One import restores the folder tree.
The RFC 4155 document describes the MBOX layout. Select MBOX when Thunderbird or your archive system expects that layout.
What It Reads
| Store type | Result |
|---|---|
| RocksDB | Read from the copied folder together with its message data. |
| SQLite | Opened from the copied SQLite file along with its message data. |
| PostgreSQL, MySQL, MariaDB or FoundationDB | Outside the claim. Only RocksDB and SQLite are supported. |
| A running Stalwart server | Not required, because nothing launches a server. |
Three Steps
Once you have copied the store folder, keep the original as it is.
Open Your Store Copy
Open Univik Stalwart Mail Recovery, then browse to the folder or file that contains your copy. The accounts inside it are listed.
Choose Accounts and a Format
Mark the accounts that you want to keep and add a folder or date limit if needed. Next, select PST, EML or MBOX as the format.
Start and Check the Log
Enter the output folder and start. If the backup stops, use resume. Then read the log for the accounts that were saved.
The Stalwart backup tool trial saves up to 25 messages per folder.
Free Trial
Use the trial on one account and open the archive in the program that you plan to use.
| Item | Trial | Licence |
|---|---|---|
| Messages saved in a folder | 25 | Every one |
| Price | Free | From $999 in one payment |
| Setup file | Shared with the licence | Shared with the trial |
| Refund | Not needed | 30-day refund policy |
The trial uses the licence screens, so what you see in it matches the paid edition.
A licence at $999 or more saves every message. For a large store, read the buy page before you commit.
Before You Back Up
If you take three precautions, the archives are complete.
Copy the Entire Store Folder
Include the complete data folder with its message data. A partial copy can leave accounts with missing message bodies.
Stop the Server or Use a Snapshot
While the server is online, new mail changes the store. Stop it first or copy from a snapshot, which gives you a consistent copy.
Record the Server Version
Put the version number in the name of your output folder. A restore years later then starts from the right release.
If one account looks right, save the remaining accounts.
After the Backup
When you open a few sample files, you learn whether the archives are usable.
Try the PST in Outlook
Import a sample PST and see whether its folder tree equals the one in the account list.
Read an .eml File
Open one message file and check the From, To and Date lines against what you expect.
Reconcile the Log
The log should list each account that you selected. Compare its folder counts with your output folder.
Read the rows from the top.
| Finding | Next step |
|---|---|
| An account is absent | That account may not exist in your store copy. Copy the store again and reopen it. |
| A folder has no messages | Mail deleted before the copy was taken cannot appear. Check the log first. |
| The backup stopped | Restart with resume and confirm the saved accounts in the log. |
| The store does not open | The data may be damaged or from an unsupported backend. Check the backend first, then use the recovery edition. |
Who It Is For
If the goal is a new server rather than an archive, read about the Stalwart migration tool.
Admins Facing a Stalwart Upgrade
The 1.0 release cannot read stores from earlier versions. Save mail as archives before you upgrade, so a failed step does not destroy your only copy.
Teams Switching Providers
If your mail moves to another provider, keep PST or EML archives of the old server for your records.
Owners With a Retention Duty
If you must keep mail for years, standard files outlast any single server release.
Limits
Stores
Supported Stores Are Two
Backends other than those two are not claimed. Confirm your backend first.
Config
Server Configuration Stays Out
Domains, settings and server configuration are outside the archive. Only mail is saved.
Copy
Mail After the Copy Is Missing
A message that arrived after the copy is not in the archive. Take a fresh copy before each backup.
Cap
Trial Allowance
The trial saves 25 messages from each folder, which is sufficient to check a single account. Buying a licence removes the allowance.
Side by Side
Compare three routes to a Stalwart backup before you choose.
| Question | Upgrading Stalwart | A mail client | Univik Stalwart Mail RecoveryTRIAL |
|---|---|---|---|
| Opens an older store | No, v1.0 rejects earlier versions | Only through a running server | Yes, from your copy |
| Output you keep | Mail inside Stalwart | Messages shown by the client | PST, EML and MBOX archives |
| Needs the server running | Yes | Yes, one password per account | No |
| Effect on the source | Starting a server on the store may alter it | Fetching a whole message marks it read | None, because your copy is read-only |
| Stated limits | Old stores need a migration first | One login for each account | Trial saves up to 25 messages per folder |
The first column draws on the 1.0 announcement and the others are the Univik view. See RFC 9051 for how IMAP sets the read flag.
Checklist
Check four items before you begin.
Windows 10 or Windows 11
Use a 64-bit PC. .NET Framework 4.8 is built into Windows 11 already.
No Stalwart Install Needed
The software reads the store files itself, so no server software goes on your PC.
Every File of the Store
Take the whole data folder along with the message data and select only that copy.
Free Drive Space
Leave enough free space on the output drive for every account in your selection.
| Edition | Univik Stalwart Mail Recovery, version 6.11 for Windows |
| Purpose | Stalwart backup software |
| Input | Copy of a RocksDB or SQLite store plus message data |
| Output | Archive files in PST, EML or MBOX form |
| Selection | By account, folder or date |
| Features | Preview and resume, with an account-by-account log |
| Setup file | Same installer as the Stalwart recovery edition |
| Trial | 25 messages per folder at most |
| Licence | One payment of $999 or more |
Questions
Written by the Univik Team Email and file software since 2013
The Univik team wrote this page. Stalwart facts link to the vendor pages they come from. The tool facts come from Univik's build.
Updated on 14 November 2026
Univik Since 2013Read-Only AccessPST, EML and MBOX30-Day Refund Policy
Stalwart is a name owned by its respective owner. Univik isn't affiliated with it.