Univik Stalwart Mail Recovery for Windows

Stalwart Mail Recovery Recover mail from a crashed, corrupt or old Stalwart data store copied to a Windows PC, with the server switched off

Univik Stalwart Mail Recovery is Windows software that recovers mail from a crashed, corrupt or old Stalwart data store copied to your PC. It reads the store and its message blobs with Stalwart switched off and saves the readable mail as new files. Server settings and admin lock-out are a different task, handled by Stalwart's own recovery mode.

Read-Only SourceNo Stalwart Server NeededCrashed or Corrupt StoresFolder Tree Kept

*In the trial you can open a copied folder, see the accounts and preview messages. Each mailbox folder saves 25 messages, enough to check the files. A licence removes that limit and Univik's 30-day refund policy applies.

  • Data Store and Blobs Together: Reads a RocksDB or SQLite store with the message blobs kept beside it or inside it.
  • Folders, Flags and Headers Kept: Each account is saved with its folder tree and read flags.
  • Recovered Mail Saved Four Ways: Saved as PST, EML or MBOX files on your PC or uploaded by IMAP to a mail host you name.
  • Several Accounts in One Pass: The source stays read-only. A stop can be resumed and a log report lists every account.
Software box of Univik Stalwart recovery for Windows

 Before You Download

What to Expect From Univik Stalwart Mail Recovery

Check these five facts against your own copy before you download.

2

Data Store Types Read

RocksDB and SQLite inside a copied data folder.

4

Ways to Get Mail Out

Three file formats on your PC or an upload to a mail host.

25

Trial Messages per Folder

The limit applies to every mailbox, which leaves enough to check the output first.

$999

One-Time Licence

From $999 for version 6.11 on Windows 10 and 11.

30

Day Refund Policy

Univik's 30-day refund policy covers every purchase.

 Key Features

What Univik Stalwart Mail Recovery Does

When a data folder is crashed or corrupt, these six features get the readable mail out of your copy.

Reads the Data Store and the Message Blobs

Stalwart keeps mailbox records in a data store and message bodies in a blob store. Both the data store and the blob store open from a copied folder (the blobs may sit in that folder or inside the data store). A RocksDB or SQLite data store, even one the server no longer starts on, then comes back as accounts with the mail that is still readable.

Works With Stalwart Switched Off

You do not need a Stalwart server on your PC. Copy the data folder from the old machine and select the copy. Once you select the folder, the accounts it contains appear in a list.

Folders, Read Flags and Headers Stay

Each mailbox keeps its folder tree and read flags. Message headers are kept in the saved files, so your senders, dates and routing lines read as they did on the server.

Recovered Mail Saved as Files or Uploaded

PST, EML and MBOX files go to a folder on your PC. The IMAP upload sends the same mail to a mail host you name. Contacts and calendars are saved as VCF and ICS files where the output format has no place for them.

Preview, Date Range and Selected Accounts

Use the preview to check a message before saving. Limit the recovery to a date range and choose only the folders or accounts you need, so a large store does not become a large output.

Original Store Left Unchanged

Your copied store is opened read-only. If you select several accounts, they go through in one pass. If a recovery stops, the software restarts where it stopped and a log report lists every account.

 Why It Will Not Open

Why Your Old Stalwart Store Needs Another Reader

If you search for Stalwart mail server recovery, you find two different tasks. Each task has its own tool. Two facts from Stalwart's own documentation explain why neither one covers your mail data.

Fact 1: A v1.0 Server Will Not Open an Older Store

Stalwart's v1.0 announcement (26 October 2026, updated 12 November 2026) states that a v1.0 server will not open a store created by an earlier version. If your mail is still in an older store, it needs another way out.

Fact 2: Recovery Mode Covers Settings, Not Mail

The recovery-mode documentation describes a startup state with mail services stopped and only the management interface on port 8080. It brings back admin access and configuration. It does not save mail data as files.

The Way Out: Read the Copied Store Directly

Univik Stalwart Mail Recovery opens a copy of the data folder on a Windows PC, so the mail data comes out as files while the old server stays off. The old server needs no install and no admin login on this route, which makes it the safe route when the original store is all you have.

 What It Reads

The Stalwart Data Folders the Software Opens

When you copy the folder, keep its tree unchanged. Two store types go in and four ways of saving mail come out.

RocksDB, SQLite

Data Store

The software reads a RocksDB or SQLite data store inside the copied folder. Both appear in the data store list of Stalwart's storage documentation.

Blobs

Message Store

Message bodies are read from blobs that sit in the copied folder or inside the data store. Blob stores on S3-compatible or Azure storage are not claimed.

.pst .eml .mbox

What Comes Out

The recovered folder tree of each account goes into PST, EML or MBOX output or onto a mail host by IMAP upload. A copied directory or a RocksDB backup copy opens the same way as a copied data folder.

 Three Steps

How to Recover Stalwart Mail From a Crashed or Corrupt Store

If the old server is already off, three steps on a Windows PC get your mail out.

1

Copy and Open the Data Folder

Copy the Stalwart data folder to your PC with its tree unchanged. Select that folder in the software and the accounts it contains are listed.

2

Select Accounts and Preview

Choose the accounts and folders you want. Set a date range if only recent mail matters, then preview a message to check the content before saving.

3

Save the Recovered Mail or Upload It to IMAP

Choose how the recovered mail should leave the software and a folder on your PC. PST, EML and MBOX are saved as files. For an IMAP upload, enter the host details of the mailbox that should receive the mail. Folders and read flags are kept and a log lists every account.

Try It on Your Copy, Free

Needs Windows 10 or 11 on a 64-bit PC · Stalwart stays off · the copy opens read-only.

 Where It Fits

When You Need Stalwart Mail Recovery Software

If one of these four situations sounds like yours, this page is for you.

Mail Missing After an Upgrade

After a version change your mail may not show in the new server. Copy the old data folder and read the mail from your copy.

An Old Store a Newer Server Rejects

Stalwart v1.0 will not open a store from an earlier version. A Windows PC with your copy can read it instead.

Crashed Server or RocksDB Error

When your server crashed or will not start on a damaged data store, the software reads what is still readable from your copy.

Recovered Mail Into Outlook or Another Host

You can take a PST file for Outlook, EML or MBOX files for other clients or an IMAP upload to a new host.

 Repair and Recover

Repairing a Corrupt Stalwart Store: Copy First, Recover Second

What repair means

If you search for repair, your Stalwart server probably crashed, shows a RocksDB error or will not start. Univik Stalwart Mail Recovery does not rewrite the damaged store. It opens a copy read-only, takes out the mail that is still readable and saves that mail as new files.

The software never changes the store it opens, so reading a copy adds no damage. Mail that is no longer in the copy is not claimed.

Copy before anything else

If your server crashed, it is already off. Copy the data folder as it is before you try a restart. If Stalwart is still running, switch it off first so the files do not change during the copy. Copy the whole data folder with its tree unchanged. If your blob store is a filesystem folder outside the data folder, copy that folder too.

Work from the copy only, because a copy is the safe choice when the original is the only record of your mail. Univik does not recommend pointing any tool at a live store.

 Compare the Paths

Three Ways to Recover Stalwart Mail Compared

When you compare Stalwart's own tools with Univik, check each row against your own situation.

What you need Recovery Mode Vandelay and stalwart-migrate Univik Stalwart Mail RecoveryTRIAL
Made for Admin access and configuration with mail services stopped Moving data into a new store. Vandelay takes one account. stalwart-migrate copies a v0.16.27 deployment into an empty v1 store Mail recovered from a copied crashed or corrupt store into files
What comes out Not mail data A SQLite archive, a JMAP server or a v1 store PST, EML, MBOX or IMAP upload
Accounts per pass Not applicable One account for Vandelay. A whole deployment for stalwart-migrate Several, with resume and a log
Where it works On the Stalwart server itself stalwart-migrate works on Unix-like systems A Windows PC with Stalwart off
Fits when You are locked out of the admin interface You are moving data into a Stalwart or JMAP server The store is crashed, corrupt or rejected by a newer server and the old server is off

The details on Stalwart's tools come from its recovery-mode documentation, its Vandelay announcement and the stalwart-migrate repository, all read on 13 November 2026.

Mail that already sits in a Maildir folder is a different format. The Univik Maildir Converter page covers it.

 Honest Limits

What Stalwart Mail Recovery Does Not Claim

If a feature is not on the software's list, Univik does not claim it. Everything below stays outside that list.

PostgreSQL, MySQL, MariaDB or FoundationDB data storeNot claimed
S3-compatible or Azure Blob Storage blob storeNot claimed
zstd-compressed v1.0 objects and encrypted-at-rest storesNot claimed
Mail of a deleted account (orphaned mail)Not claimed
Sieve scripts and filesNot claimed. Contacts and calendars are saved as VCF and ICS
Direct upload to Office 365 or GmailNot claimed. The upload is IMAP only
A tested Stalwart version listNot published for this release
Server settings and admin lock-outA different task, covered by Stalwart recovery mode
Repairing or rewriting the storeNot done. The software reads the copy and leaves it unchanged. The mail comes out as new files
Mac or LinuxWindows only. Copy the data folder to a Windows PC

 What You Need

Stalwart Mail Recovery System Requirements

Windows Version

Windows 10 or 11 on a 64-bit PC, with .NET Framework 4.8 installed.

Stalwart Not Required

You do not need a Stalwart server on your PC. A copied data folder is all the software reads.

Windows Only

There is no Mac or Linux build. If your Stalwart server is on Linux, copy the data folder off that host and onto a Windows PC first.

Read-Only Source

Your copied store is opened read-only and nothing in it is rewritten.

Software InformationUnivik Stalwart Mail Recovery
Version6.11
LicenceThe trial saves 25 messages for each folder of a mailbox. A one-time licence starts from $999
Platform64-bit Windows 10 or Windows 11
Framework.NET Framework 4.8
InputA copied Stalwart data folder with a RocksDB or SQLite data store and its message blobs
SavesPST, EML and MBOX files, VCF and ICS for contacts and calendars, IMAP upload

 Questions

Common Stalwart Mail Recovery Questions

Stalwart has a recovery mode for settings and admin access. It starts the server with mail services stopped and only the management interface on port 8080. Vandelay and stalwart-migrate are Stalwart's other tools. They move data into a new store or a JMAP server. Univik Stalwart Mail Recovery is different because it reads mail data from a copied store on a Windows PC and saves what it recovers as PST, EML or MBOX files.

Univik has not published a tested version list for Univik Stalwart Mail Recovery. Stalwart's v1.0 announcement (26 October 2026, updated 12 November 2026) says a v1.0 server will not open a store created by an earlier version. The software reads a copied older store without a server. Copy your store and try the free trial to see which accounts it lists.

It reads RocksDB and SQLite data stores inside a copied data folder. PostgreSQL, MySQL, MariaDB and FoundationDB data stores are not claimed.

Switch Stalwart off if it is still running and copy the data folder to a Windows PC. Copy the blob folder as well when the blobs sit outside the data folder. Select the copy in Univik Stalwart Mail Recovery, choose the accounts and save the recovered mail. The crashed server does not have to start again. What comes out depends on what is still readable in the copy.

Yes. No Stalwart server needs to be installed or switched on. Copy the data folder to a Windows PC and open the copy.

A RocksDB error can stop a server from working after an update. Univik Stalwart Mail Recovery does not clear the error. It reads the copied RocksDB store, takes out the mail that is still readable and leaves the original unchanged.

Stalwart's v1.0 announcement (26 October 2026, updated 12 November 2026) says a v1.0 server will not open a store created by an earlier version. A server that cannot open the old store may show no old mail. The mail can still sit in the old store, so copy that store and read it with Univik Stalwart Mail Recovery.

It reads a copied older store that a v1.0 server will not open. A v1.0 store with zstd-compressed objects and any encrypted-at-rest store are not claimed.

In this case repair means getting the mail out of the damage, not fixing the store. The software reads what is still readable in the copy and does not rewrite the store. Mail that is no longer in the copy is not claimed.

Yes. A copied directory or a RocksDB backup copy opens the same way as a copied data folder. A pg_dump file is not claimed.

Orphaned mail after an account delete is not claimed. The software reads accounts that exist in the copied store.

No. Your copied store is opened read-only and nothing in it is rewritten. Work on a copy anyway and keep the original unchanged.

It saves PST, EML and MBOX files and uploads to an IMAP server. Contacts and calendars are saved as VCF and ICS files where the output format has no place for them.

Yes. Several accounts go through in one pass. The software restarts where it stopped and saves a log report. Sieve scripts and files are not claimed.

In the trial you can open a copied folder, see the accounts and preview messages. Each mailbox folder saves 25 messages, enough to check the files before you buy.

A licence is a one-time payment from $999. Each purchase is covered by Univik's 30-day refund policy.

A 64-bit Windows 10 or Windows 11 PC with .NET Framework 4.8. Mac and Linux are not supported. Copy the Stalwart data folder to a Windows PC first.

Written by the Univik Team Building mail and file recovery software since 2013

Univik wrote this page from Stalwart's public documentation and the facts it contains about its own software. Each statement about a Stalwart version includes its date and source in the text above.

Last updated

Since 2013Dated Sources